Marginal cost curve Essays

Marginal cost curve Essays Marginal cost curve Essay Marginal cost curve Essay Marginal cost curve A curve that graphically represents the relation between the marginal cost incurred by a firm in the short-run product of a good or service and the quantity of output produced. Diagram: Marginal cost curve. * The MC curve is generally increasing. This is due to the decreasing  marginal productivity  of   labour. (Referred from econ econmodel. com downloaded on 14th May 2013). b. ) The Average Cost (AC) The average cost is the total cost divided by the number of units produced. Average cost curve – The graphical representation of average cost.Diagram: Average cost curve. The AC curve is U-shaped. This is because the ATC is made up of AVC, which is increasing, and AFC, which are decreasing. At low production quantities the decline in AFC dominates, but eventually the increasing AVC overwhelms the average costs. c. )The Average Fixed Cost (AFC) A cost that does not change with an increase or decrease in the amount of goods or services produced. Fixed costs are expenses that have to be paid by a company, independent of any business activity. It is one of the two components of the total cost of a good or service, along with variable cost.Average fixed cost curve A curve that graphically represents the relation between average fixed cost incurred by a firm in the short-run product of a good or service and the quantity produced. Diagram: Average Fixed Cost Curve: * AFC curve is always declining with quantity. This is because the same amount of fixed costs  is being averaged over a growing quantity of output, leading to a decline in the curve. * (Referred by web. pedia http:// www. amosweb. com downloaded on 14th May 2013). d). The Average Variable Cost (AVC) A cost that change with the change in volume of activity of an organization.Average variable cost  (AVC) is an  economics  term that refers to a firms  variable costs  (labour, electricity, etc. ) divided by the quantity (Q) of  output  produced. Variable cost s are those costs which vary with output. Diagram: Average variable cost curve: * The AVC is decreasing when it is above the MC curve and increasing when it is below the MC curve. This is because AVC is essentially the average of the marginal  costs of each unit of output. This will lead to an increasing or a U-shaped AVC curve. (Referred by http://en. wikipedia. org downloaded on 14th May).Answer 2. ) Relationship between the law of diminishing returns and the concept of economies of scale: * Law of diminishing returns. The tendency for a continuing application of effort or skill toward a particular project or goal to decline in effectiveness after a certain level of result has been achieved. The law of diminishing returns say that each time we do something to receive a benefit, the benefit will be less and less. (Reference – Michale W. Newell, Marina N, Grashina : The Project Management). * Features. The main features of this law are as follows:- . ) Only one variable inp ut is varied and all others are held constant. 2. ) No change in technique of production. 3. ) Variable proportions production functions. It means more of a variable factor can be used with the constant input of the fixed factors. 4. ) All units of variable factor are homogeneous. 5. ) Adequate or standard doses of variable factor are applied. * Explanation. The law of diminishing returns means that the productivity of available  declines as more is used in  short-run production, holding one or more inputs fixed.This law has a direct bearing on  market supply, thesupply price, and the  law of supply. If the productivity of a variable input declines, then more is needed to produce a given quantity of output, which means the cost of production increases, and a higher supply price is needed. The direct relation between price and quantity produced is the essence of the law of supply. Total Product Curve: The curve labelled TP in the top panel is the  total product curve, the t otal number of goods produced per hour for a given amount of labour.The increasing slope of the TP is attributable to the law of diminishing marginal returns. Marginal Product Curve: The Marginal curve indicates how the total production of goods changes when an extra worker is hired. The negatively-sloped portion of the MP curve is a direct attributable to the law of diminishing marginal returns. Average Product Curve: The  average product curve indicates the average number of goods produced by workers. The negatively-sloped portion of the AP curve is indirectly caused by the law of diminishing marginal returns.As marginal product declines, due to the law of diminishing marginal returns, it also causes a decrease in average product. * Arleen J. Hoag,  John H. Hoag(2006), Business and Economics, pg. 122 (London: World Scientific Publishing Co. Ltd. ) Returns to scale,  in economics is the quantitative change in output of a firm or industry resulting from a proportionate increas e in all inputs. If the quantity of output rises by a greater proportion- e. g. , if output increases by 2. 5 times in response to a doubling of all inputs- the  production process  is said to exhibit increasing returns to scale.Such economies of scale may occur because greater efficiency is obtained as the firm moves from small- to large-scale operations. Decreasing returns to scale occur if the  production  process becomes less efficient as production is expanded, as when a firm becomes too large to be managed effectively as a single unit. Brit britannica. com downloaded on 19th May 2013. According to Leibhfasky, †Returns to scale relates to the behaviour of total outputs as all inputs are varied and is a long run concept. * Explanation:In the long-run, output can be increased by increasing all factors in the same proportion or different proportions. Ordinarily, law of returns to scale refers to increase in output as a result of increase in all factors in the same p roportion. Such an increase in output is called Returns to Scale. * Aspects of Returns to Scale. As in the case of returns to a factor, there are three aspects of returns to scale, viz. (1) Increasing Returns to Scale, (2) Constant Returns to Scale, (3) Diminishing Returns to Scale. 1. Increasing return of scale:-Every firm tries to earn more and more profit by multiplying its output.Initially production increases at faster rate than increase in the input. It is evident from the following schedule that by doubling additional labour and capital, output increases from 16 units to 25 units. It shows that inputs increased by 100%, whereas capital increased by 150%. By doubling, production increased from 25 to 60 showing that input increased by 100% but the output increased by 140%. this shows the law of increasing return. Thus, any percentage increase in inputs is causing a greater percentage increase in output. Increasing returns to scale are thus operative.The main cause of its operat ion is that when scale of production is increased then due to indivisibility of factors such as labour, tools, implements and machines, division of labour and specialization and many types of economies are available. On account of these economies, proportional increase in returns is more than the proportionate increase in factors of production. All these economies are only internal economies as these are related to the scale of production of the concerned firm. 2. Constant Return to Scale:-If the scale of production is further increased, it is found that the both input and output increase at equal rates i. . , at the same percentage. Thus increasing the production, the increase in output remains constant i. e. , 100%. * This situation arises, when after reaching a certain level of production, economies of scale are counter-balanced by diseconomies of scale. In mathematical terminology, that production function which reflects constant returns to scale is called Linear and ‘Homo geneous Production Function’ or homogeneous function of First degree and is important in elucidating Euler’s Theorem in distribution.This function states that if labour and capital are increased in equal proportion then output will also increase in the same proportion. 3. Decreasing Return of Scale:-The increase in percentage of input is more than the output. In the following diagram, with every increase in input i. e. , 100%, output increases at lesser than 100%, showing the law of decreasing return of scale. S. A. Siddiqui (2006), Managerial Economics and Financial Analysis, pg. 107 (New Delhi: New Age International Publishers) Returns to scale are thus diminishing.The main cause of its operation is that diseconomies outweigh economies of scale, e. g. unwieldy business, indivisible factors becoming inefficient and less productive, difficulties of control and rigidities due to large managements, higher cost of skilled labour, price of raw material going up, high tran sport charges, etc. (Reference – TR Jain and OP Khanna, Business Economics p. 142). Answer3. ) (a) ‘In the real world there is no industry which conforms precisely to the economist’s model of perfect competition. This means that the model is of little practical value’.Perfect competition: (1) buyers  and  sellers  are too numerous and too small to have any  degree  of  individual  control over  prices, (2) All  buyers and sellers seek to maximize their  profit  (income), (3) buyers and  seller  can freely  enter  or leave the  market, (4) all buyers and sellers have  access  to  information  regarding  availability, prices, and  quality  of  goods  being traded, and (5) All goods of a particular nature are  homogeneous, hence substitutable for one another. Also called  perfect market  or  pure competition. (Reference:   businessdictionary. om downloaded on 19th May 2013. ) Diagram for perfect com petition: (Referred by economicshelp. org downloaded on 19th May 2013). A perfect competition is unrealistic as many of its conditions are quite difficult to fulfil. Especially no barriers to entry, is very rare as even start up cost can act as a significant barrier. While other conditions like perfect information and identical products are though possible not common. Apart from these there are many other conditions like no transportation cost which is again highly rare.The example of perfect competition would be in agriculture. Identical products (fruits, vegetables, etc. ), and not really need any advertising. There are no barriers to enter. It is the most realistic example, in reality perfect competition does not exist. (Reference: khan academy). (b). Short Run Price and Output for the Competitive Industry and Firm: 1. Short Run Equilibrium of the Firm A firm is in equilibrium in the short run when it has no tendency to enlarge or contract its productivity and needs to earn maxi mum profit or to incur minimum losses.The short run is a period of time in which the firm can vary its productivity by changing the erratic factors of production. The number of firms in the industry is fixed since neither the existing firms can leave nor new firms can enter it. 2. Short Run Equilibrium of the Industry An industry is in equilibrium in the short run when its total output remains steady there being no propensity to enlarge or contract its productivity. If all firms are in equilibrium the industry is also in equilibrium. For full equilibrium of the industry in the short run all firms must be earning normal profits.But full equilibrium of the industry is by sheer accident for the reason that in the short rum some firms may be earning super normal profits and some losses. Even then the industry is in short run equilibrium when its quantity demanded and quantity supplied is equal at the price which clears the market. Roger A. Arnold,(2005,08) Economics, 8th ed. (USA: Thoms on Learning, Inc. 2008) In the short run the equilibrium market price is determined by the interaction between market demand and market supply. In the diagram shown above, price P1 is the market-clearing price and this price is then taken by each of the firms.Because the market price is constant for each unit sold, the AR curve also becomes the Marginal Revenue curve (MR). A firm maximises profits when marginal revenue = marginal cost. In the diagram above, the profit-maximising output is Q1. The firm sells Q1 at price P1. The area shaded is the economic (supernormal profit) made in the short run because the ruling market price P1 is greater than average total cost. Not all firms make supernormal profits in the short run. Their profits depend on the position of their short run cost curves. Some firms may be xperiencing sub-normal profits because their average total costs exceed the current market price. Other firms may be making normal profits where total revenue equals total cost ( i. e. they are at the break-even output). In the diagram below, the firm shown has high short run costs such that the ruling market price is below the average total cost curve. At the profit maximising level of output, the firm is making an economic loss (or sub-normal profits) The Effects of a change in Market Demand In the diagram below there has been an increase in market demand (ceteris paribus).This causes an increase in market price and quantity traded. The firms average revenue curve shifts up to AR2 (=MR2) and the profit maximising output expands to Q2. Notice that the MC curve is the firms supply curve. Higher prices cause an expansion along the supply curve. Following the increase in demand, total profits have increased. An inward shift in market demand would have the opposite effect. Think also about the effect of a change in market supply perhaps arising from a cost-reducing technological innovation available to all firms in a competitive market. Reference: tutor tutor 2u. net downloaded 19th May 2013. (c) The long-run perfectly competitive equilibrium for the firm:-  ¦ Economic profits bring entry by new firms. The industry supply curve shifts rightward and reduces the market price. The fall in price reduces economic profit and decreases the incentive to enter the industry. New firms enter until it is no longer possible to earn an economic profit.  ¦ Economic losses lead to exit by existing firms, which shifts the industry supply curve leftward. The price rises, and the higher price reduces economic losses.Firms exit until no firms incur an economic loss. Firms change their plant size if it increases their profits. D=P= MR = AR - the firm maximizes its profits. P = minimum short-run average cost (SRAC) The firm’s economic profit is zero. P = minimum (LRAC) - the firm’s plant size cannot be changed in order to increase its profits. Frank Machovec, (2003), Perfect Competition and Transformation of Economics, (New York: Taylor;am p; Francis e-Library, 2003). Answer 4. ) MonopolyA pure monopoly is a single supplier in a market.For the purposes of regulation,  monopoly power  exists when a single firm controls 25% or more of a particular market * Less Efficient:- * ABCPM :-Supernormal Profit (AR-AC) Q * Shaded portion:- Deadweight welfare loss (combined loss of producer and consumer surplus) compared to competitive market * Higher Prices:-Higher Price and Lower Output than under Perfect Competition. This leads to a decline in consumer surplus and a deadweight welfare loss * Allocative Inefficiency. A monopoly is allocative inefficient because in monopoly the price is greater than MC.P ;gt; MC. * Productive Inefficiency A monopoly is productively inefficient because it is not the lowest point on the AC curve. * X Inefficiency. It is argued that a monopoly has less incentive to cut costs because it doesnt face competition from other firms. Therefore the AC curve is higher than it should be. * Supernormal P rofit. Leads to an unequal distribution of income. * Higher Prices to Suppliers   A monopoly may use its market power and pay lower prices to its suppliers. E. g. Supermarkets have been criticised for paying low prices to farmers. Diseconomies of Scale   It is possible that if a monopoly gets too big it may experience diseconomies of scale. higher average costs because it gets too big   * Charge higher prices to suppliers. Monopolies may use their supernormal profits to charge higher prices to suppliers. Economic organisation(2013) Website:- economicshelp. org/microessays/markets/monopoly. html 2More Efficient:- * Research and Development. Monopolies can make supernormal profit; this can be used to fund high cost capital investment spending. Successful esearch can be used for improved products and lower costs in the long term.. * Economies of scale. Increased output will lead to a decrease in average costs of production. These can be passed on to consumers in the form of lowe r prices. If a monopoly produces at output Q1, average costs (AC 1) are much lower than if a competitive market had firms producing at Q2 (AC 2). * Monopolies Successful Firms. A firm may become a monopoly through being efficient and dynamic. A monopoly is thus an efficient. For example Google has gained monopoly power through being regarded as best firm for search engines.Tejvan R. Pettinger, Economic Dictionary,(UK: Economics Blog, 2013)Retrieved from:- economicshelp. org/microessays/markets/advantages-monopoly. html Answer 5. ) Economic governance in Australia has undergone radical changes since the 1970s. Many of these changes are associated with the market-oriented policies collectively referred to as ‘microeconomic reform’. Broadly speaking, microeconomic reform can be defined as government policies or initiatives aimed at improving the performance and/or the efficiency of industries or sectors in the economy (Forsyth 1992).Remarkably, such a quest for efficiency was not a major policy focus for much of the twentieth century in Australia. However, since the 1970s, growing pressure on the economy, together with evidence of widespread inefficiency, saw microeconomic reform become a key aspect of economic policy in Australia. The era of microeconomic reform in Australia may be divided into three main phases, with a degree of overlap. In the first, deregulatory, phase, the main focus was on rationalising public intervention in private sector markets, with the object of ‘getting prices right’.In the second phase, referred to here as the ‘privatisation’ phase, attention shifted to market-oriented reforms of the public sector, including corporatisation and competitive contracting as well as privatisation. In the third ‘competitive regulation’ phase, the idea of deregulation was replaced by regulation designed to produce, or simulate, competitive market outcomes (see also Parker this volume). The central argum ent of the chapter is that each of these phases was associated with the prominence of particular institutions and with specific tendencies in economic governance. In particular, whereas he governance models associated with the privatisation phase, the private corporation was taken as the ideal model of public sector governance. By contrast, in the competitive regulation phase, governments have relied on increasingly intrusive systems of regulation to control both public and privately-owned monopolies Privatisation often appears to be driven by political expediency and ideology rather than by economic theory. This dislocation between theory and practice led Kay and Thompson (1986) to declare privatisation in the United Kingdom a ‘policy in search of a rationale’.In fact, there has been significant economic research on optimal ownership in the past 20 years, including the comparison between government and private ownership. This work provides the basis for understanding b oth the success and failure of privatisation. Three Causes of Privatisation: Performance in privatisation must be judged on a case-by-case basis. Three key privatisations in Australia have been the Commonwealth Bank, the partial privatisation of Telstra and the privatisation of the Victorian electricity system. How do these privatisations ‘stack up’ against the theory? 1. The Commonwealth BankIn the 1940s and 1950s the Commonwealth Bank was the central banker for Australia. The Reserve Bank of Australia took over this role in 1959, placing the Commonwealth Bank in a similar position to a number of highly regulated private banks. Deregulation of the Australian banking sector in the 1980s meant that there was little if any special role for State-owned commercial banks, and the Commonwealth bank was privatised in three tranches during the 1990s. The first sale of 30 per cent of the Bank in 1991 was the first large privatisation by share float in Australia and it set the be nchmark for future sales, such as the sale of GIO and Qantas.Overall, it is likely that the Government sold the Commonwealth at a discount to its true market value (Harris and Lye 2001). But in terms of 17economic welfare it seems clear that the sale of the Commonwealth Bank made perfect sense. The bank operated in active competition with private banks and its functions were essentially identical to those private competitors. In fact, given the tendency for politicians to seek short-term electoral kudos by railing against the banking system, it is likely that continued government ownership of the Commonwealth Bank would have opened it up to political exploitation in the 1990s.In economic terms, the privatisation of the Commonwealth Bank was clearly sensible policy. 2 Telstra Telstra was formed in 1992 by the merger of Telecom Australia and the Overseas Telecommunications Corporation (OTC). Both of these were fully owned by the Commonwealth Government. Telecom Australia controlled Au stralia’s domestic telephone network while OTC controlled overseas telecommunications. In the late 1990s, 49. 9 per cent of Telstra was sold by the Government in two tranches. This partial privatisation is the largest by value in Australia, reaping over $30 billion for the Commonwealth. 1At first blush, the sale of Telstra might appear similar to the sale of the Commonwealth Bank. After deregulation in July 1997, Telstra competed vigorously with privately-owned carriers. Since then, Telstra has lost market share in both domestic long-distance calls and overseas calls. Telstra also currently faces vigorous competition in mobile telephony. 18Unlike banking, however, telecommunications involves a key natural monopoly element, the customer access network (CAN) that provides the ‘last link’ in the telephone network between a switch and a customer’s phone.Telstra owns the CAN and its private competitors rely on Telstra providing them access to the CAN in order t o compete. Telstra could eliminate its private competitors outside the CBD areas of Australia if it refused them the right to either originate or terminate calls using the CAN. Telstra faces a wide range of regulations, including retail price controls, procedures for setting wholesale access prices and rules to prevent any anticompetitive behaviour. This regulation has been modified over the past five years and in 2001 the Productivity Commission recommended further reform of Telstra’s regulatory regime (Commonwealth of Australia 2001).In 2002 the Federal Government investigated and rejected reforming Telstra by accounting separation to ‘isolate’ the CAN. The partial privatisation of Telstra failed to adequately recognise the source of market failure- the natural monopoly CAN. Neither did it establish appropriate procedures to deal with this problem. One solution might have been vertical separation of the CAN from the rest of Telstra. The CAN could have remained in public ownership with open access while the remainder of Telstra could have competed with other telecommunications companies. Alternatively, the management of the CAN could have changed.For example, the CAN could be 19jointly owned by a number of licensed carriers. These carriers would have a mutual obligation to maintain the CAN but otherwise would compete. The sharing of infrastructure facilities between competing firms sometimes occurs with gas pipelines. Discontent with the partial privatisation has made it politically difficult to sell the remainder of Telstra. In the absence of a restructured approach to the CAN, further privatisation will simply mean ongoing costly regulation. Such regulation will continue into the future as the CAN grows in importance for data rather than voice telecommunications traffic. The Victorian electricity system The creation of a National Electricity Market (NEM) was a key part of the Hilmer reforms. This market involves generators competing to s ell power into a grid connecting South Australia, Victoria, New South Wales and Queensland. The proposed construction of BassLink will connect Tasmania to the NEM. Privatisation is not required under the NEM but private generators are able to compete with government-owned facilities. The Kennett Government in Victoria decided to sell the State’s electricity assets to the private sector.Privatisation was preceded by vertical and horizontal restructuring, including the creation of five distribution/retail companies, five competing generation businesses and a single transmission business. The total proceeds of the privatisations in the mid-201990s were approximately $22. 5 billion; second only to Telstra in terms of total revenue raised. 22By separating competitive generation from natural monopoly elements, like transmission and distribution, the Victorian electricity privatisations avoided the issues of access and competitive abuse that have dogged telecommunications.Further, s ome measures of performance, such as the reliability of the distribution, have significantly improved. 23 However, both transmission and distribution have limited scope for competition and these prices need ongoing regulation. As noted earlier, this regulation has been contentious. Political interference still occurs, as both generation prices are capped under the NEM and maximum prices for power to households are set. For example, in 2001 the Victorian Government rejected recommended increases in household power prices, leading to comparisons with the Californian electricity crisis and oncerns over the long-term viability of distributors/retailers if they are unable to pass on increased wholesale electricity prices to customers. 24 The shift to a national market has also required modifications, for example, in the face of claims of price rigging by generators. 25 Further, it is not clear that long-term competition between State-owned electricity systems and private systems is viabl e. While generation and retailing can be open to competition, a preferred approach might have been to retain public ownership of transmission and distribution lines. 1Rather than heavy-handed profit-based regulation, the ongoing operation and maintenance of these facilities might have been handled through private contractors, with the relevant governments setting transmission and distribution charges to cover cost. At the same time, electricity experience shows that privatisation is not a cure for short-term political interference in key infrastructure assets. (b). The privatisation process has slowed in Australia. But this is to be expected. Most of the obvious privatisations have been completed and both politicians and bureaucrats are realising the limitations of a naive approach to privatisation.Public pressure against privatisation has grown. Despite the Federal Government’s preference for privatising the remainder of Telstra, such a policy is currently unpalatable to the electorate. Similarly, in New South Wales attempts by senior politicians to push for electricity privatisation have been thwarted by public opposition. While privatisation in Australia is not dead, it is ‘on the nose’. The current public backlash against privatisation is a direct consequence of its naive application. Some privatisations have not worked.While these sales have raised short-term revenue for the government, they have not resulted in improved social welfare because they have not carefully considered any sources of market failure and dealt appropriately with these failures. 22At the same time, the underlying motivations for privatisation remain relevant. Government still feels the need to reduce fiscal pressures and public–private partnerships (PPP), where the government ties the private development of infrastructure assets to long-term government funding, represents a new face of privatisation.Thus privatisation continues, but under another name. Aus tralia requires an integrated approach to privatisation and regulation. Private ownership with regulation is simply one of a number of options for dealing with market problems and public policy needs to recognise the costs and benefits of alternative options. This means that some previous privatisations might need to be radically re-evaluated. For example, it might be desirable to restructure Telstra with current private shareholders owning the potentially competitive assets, while the government retains the CAN.It also means that some privatisations should proceed, such as the sale of the NSW electricity generation facilities, while some other assets, such as the Victorian electricity transmission system, might better be returned to government ownership. Finally, it means that governments should not be allowed to use privatisation as an expedient source of funds. An alternation to government accounting is required so that privatisation revenues cannot be used to prop up a governmen t budget. While this reform has already started, with analysts focusing on ‘underlying’ deficit figures that remove privatisation revenues, it needs to be formalised.Privatisation and regulation are all about incentives- and the first incentives that need to be fixed are those facing our politicians.

How to Teach English Pronunciation Skills

How to Teach English Pronunciation Skills Teaching English pronunciation is a challenging task with different objectives at each level. This guide on how to teach pronunciation provides a short overview of the main issues to be addressed at each level, as well as pointing to resources on the site, such as lesson plans and activities, that you can use in class to help your students improve their English pronunciation skills. Following each level are a few suggestions for level appropriate activities. Finally, the best way to help students improve their pronunciation skills is to encourage them to speak English as much as they possibly can. Introduce the idea that even when doing homework students should be reading aloud. Learning to pronounce English well takes muscle coordination, and that means practice - not just mental activity!   Beginning Level English Learners Key Points: Syllable Stress - students need to  understand that multisyllabic words require syllable stress. Point out common syllable stress patterns.Voiced and Voiceless Consonants - Teach the difference between voiced and voiceless consonants. Have students touch their throats to note the difference between z and s and f and v to demonstrate these differences.Silent Letters - Point out examples of words with silent letters such as the b in comb, -ed endings in the past for regular verbs.Silent final E - Teach the influence of the final silent e generally making the vowel long. Make sure to point out that there are many exceptions to this rule (drive vs. live). Discussion: At the beginning level, English learners need to focus on the basics of pronunciation. In general, the use of rote learning is best for this level. For example, the use of grammar chants is a great way to help students pick up pronunciation skills through repetition. Teaching the IPA (International Phonetic Alphabet) is too challenging at this point as learners are already overwhelmed with the challenges of learning a language. Learning another alphabet for pronunciation is beyond the capability of most beginning level English learners. Certain patterns such as silent letters in English and the pronunciation of -ed in the simple past is a good starting point for future pronunciation drills. Students should also learn the difference between voiced and voiceless consonants. Beginning Level Pronunciation Activities Slap That Word! - Fun game for learners asking them to associate words that are posted on the wall of the classroom. This exercise will reinforce pronunciation patterns during a fun, competitive activityRead and Rhyme - Rhyming game asking students to come up with words that rhyme with others presented on cards. Intermediate Level English Learners Key Points: Use of Minimal Pairs - Understanding the small differences in pronunciation between similar words is a great way to help students notice these differences.Word Stress Patterns  - Help students improve their pronunciation by focusing on short sentences using standard word stress patterns.  Introduce Stress and Intonation - One of the best ways to help students is to focus their attention on the music of English through the use of stress and intonation.   Discussion: At this point, English learners will feel comfortable with relatively simple pronunciation patterns in English. Moving on to exercises using minimal pairs will help learners further refine their pronunciation of individual phonemes. Intermediate level learners should become aware of common word stress patterns, as well as sentence stress types. At this point, students can also begin becoming familiar with the IPA. Intermediate Level Pronunciation Activities IPA Symbol Card Game - This card game helps students learn phonetic symbols. Cards are included on the site that you can print out and use in class.Tongue Twisters - Classic English tongue twisters to help students focus on some of the more challenging phonemes. Advanced Level English Learners Key Points​: Refine Understanding of Stress and Intonation - Further students understanding of stress and intonation by changing up particular words stress to change meaning.Use of Register and Function  - Introduce the idea of changing through pronunciation depending on how formal or informal the situation is.   Improving pronunciation through a focus on stress and intonation is one of the best ways to improve higher intermediate to advanced level English learners. At this level, students have a good grasp on the basics of each phoneme through the use of exercises such as minimal pairs, and individual syllable stress. However, English learners at this level often focus too much on the correct pronunciation of each word, rather than on the music of each sentence. To introduce the concept of stress and intonation and the role it plays in understanding, the students first need to understand the role of content and function words. Use this lesson on practicing stress and intonation to help. Next, students should learn how to use sound scripting - a way of marking up texts to help prepare for reading aloud. Finally, advanced level students should be capable of changing meaning through word stresses within sentences to bring out contextual meaning through pronunciation. Advanced Level Pronunciation Activities IPA Transcription Lesson - Lesson focusing on continuing students familiarity with the IPA in order to focus on the issue of connected speech in English.Pronunciation Activities  from FluentU  - Make pronunciation fun with these clever ideas.